The analog EL3692-0020 input terminal enables direct resistance measurement nine measuringe ranges from 0…100 mΩ to 0…10 MΩ. The circuitry of the EtherCAT Terminal enables measurement in 2- and 4-wire versions. The EL3692-0020 offers measuring range selection, either automatic or through the controller.
the EtherCAT bridge terminal EL6692 enables real-time data exchange between EtherCAT strands with different masters. It also enables synchronization of the distributed clocks of the individual strands.
The EL9210 potential feed terminal with fuse and diagnostics enables the setup of different potential groups with a fused standard voltage of 24 V DC. The supply voltage is taken up via the front terminal contacts, fused and passed through to the adjacent terminals via the internal power contacts. The fuse is a 6.3 A fuse, which can be replaced at the front.
The KL9210 power feed terminal makes it possible to set up various potential groups with the standard voltage of 24 V DC. In order to monitor the supply voltage, the terminal with diagnostics reports the status of the power feed terminal to the Bus Coupler through two input bits. It is thus possible for the controller to check the distributed peripheral voltage over the fieldbus.
X20DS1928 The module is equipped with an EnDat encoder interface. The module automatically detects whether an encoder is connected with EnDat 2.1 or EnDat 2.2.
Bently Nevada 3500/53-A03-B01 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/22-01-01-00 288055-01 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/92-01-01-00 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output